QR Code Link to This Post Motorcycle wheel bearing and axle drivers. The Jack-Be-Quick Bearing Driver installs your new bearings & seals. Notice the machined relief in the face of the bearing driver. It is designed to apply load only to the outer portion of the bearing, not the balls, avoiding the damage that can result from using sockets. It is machined specifically to fit your Triumph from 6061 aluminum so as not to damage your bearings or races.Will fit any bearings with 1.84″ (46.8MM) O.D & 20MM or 25MM I.D bearings.The pilot adapter for 25MM I.D. bearings. Driver is 1.75″ (44.5MM) diameter. Pilots are .78″ (19.5MM) & .97" (24.6MM)Bearing Driver. and Pilot adapter ............... $60The Jack-Be-Quick front and rear axle drivers fits all Hinckley Triumphs with 25 MM front axles that are not threaded in and 20 MM rear axles. They are machined specifically to fit your Triumph from 6061 aluminum so as not to damage your axles.Front driver is .97″ (24.6mm) diameter with .77″ (19.5MM) pilot to safely punch out your front axle.Rear driver is .67″ (17mm) diameter with .41″ (10.6MM) pilot to safely punch out your rear axle.Front Axle Driver......................................................$25 Rear Axle Driver.......................................................$25 Both Front & Rear Axle Drivers...............................$45 (Save $10 over buying individually!) All three drivers & pilot adapter ............................$100To learn more or purchase, go to http://jack-be-quick.com/products/specialty-tools/